Centos 7 docker 启动容器iptables报No chain/target/match by that name转

原作者http://www.lxy520.net/2015/09/24/centos-7-docker-qi-dong-bao/

启动一个有nat映射端口的容器时iptables 报No chain/target/match by that name

docker run -d -p 2181:2181 -p 2888:2888 -p 3888:3888 garland/zookeeper  
Error response from daemon: Cannot start container 565c06efde6cd4411e2596ef3d726817c58dd777bc5fd13762e0c34d86076b9e: iptables Failed: iptables --wait -t nat -A DOCKER -p tcp -d 0/0 --dport 3888 -j DNAT --to-destination 192.168.42.11:3888 ! -i docker0: iptables: No chain/target/match by that name

找了N多网站和官方issue后，还是没找到真正的解决方法，网上到处转载的只是分析了原因，

并没有明确的解决方案，为此与同事通宵加班终于解决了这个问题

找到系统的/etc/sysconfig/iptables，如果没有用以下命令保存一下,然后查看里边的内容

iptables-save > /etc/sysconfig/iptables  
cat /etc/sysconfig/iptables

发现内容如下

*filter
:INPUT ACCEPT [0:0]
:FORWARD ACCEPT [0:0]
:OUTPUT ACCEPT [0:0]

-N whitelist
-A whitelist -s 192.168.42.0/24 -j ACCEPT
#syn
-N syn-flood
-A INPUT -p tcp --syn -j syn-flood
-I syn-flood -p tcp -m limit --limit 3/s --limit-burst 6 -j RETURN
-A syn-flood -j REJECT
#DOS
-A INPUT -i eth0 -p tcp --syn -m connlimit --connlimit-above 15 -j DROP
-A INPUT -p tcp -m state --state ESTABLISHED,RELATED -j ACCEPT
## 省略一些简单的防火墙规则

查看启动容器的报错信息发现-A DOCKERDOCKER链，但在iptables文件里并没有找到，

由于之前在自己的系统(archlinux)学习使用docker时并没遇到这问题，

所以马上去看了下自己系统里的iptables的文件，

内容如下

*nat
:PREROUTING ACCEPT [27:11935]
:INPUT ACCEPT [0:0]
:OUTPUT ACCEPT [598:57368]
:POSTROUTING ACCEPT [591:57092]
:DOCKER - [0:0]
-A PREROUTING -m addrtype --dst-type LOCAL -j DOCKER
-A OUTPUT ! -d 127.0.0.0/8 -m addrtype --dst-type LOCAL -j DOCKER
-A POSTROUTING -s 172.17.0.0/16 ! -o docker0 -j MASQUERADE
-A POSTROUTING -s 172.17.0.3/32 -d 172.17.0.3/32 -p tcp -m tcp --dport 1521 -j MASQUERADE
-A POSTROUTING -s 172.17.0.3/32 -d 172.17.0.3/32 -p tcp -m tcp --dport 22 -j MASQUERADE
-A DOCKER ! -i docker0 -p tcp -m tcp --dport 49161 -j DNAT --to-destination 172.17.0.3:1521
-A DOCKER ! -i docker0 -p tcp -m tcp --dport 49160 -j DNAT --to-destination 172.17.0.3:22
COMMIT # Completed on Sun Sep 20 17:35:31 2015 # Generated by iptables-save v1.4.21 on Sun Sep 20 17:35:31 2015 *filter :INPUT ACCEPT [139291:461018923] :FORWARD ACCEPT [0:0] :OUTPUT ACCEPT [127386:5251162] :DOCKER - [0:0] -A FORWARD -o docker0 -j DOCKER -A FORWARD -o docker0 -m conntrack --ctstate RELATED,ESTABLISHED -j ACCEPT -A FORWARD -i docker0 ! -o docker0 -j ACCEPT -A FORWARD -i docker0 -o docker0 -j ACCEPT -A DOCKER -d 172.17.0.3/32 ! -i docker0 -o docker0 -p tcp -m tcp --dport 1521 -j ACCEPT -A DOCKER -d 172.17.0.3/32 ! -i docker0 -o docker0 -p tcp -m tcp --dport 22 -j ACCEPT COMMIT # Completed on Sun Sep 20 17:35:31 2015 

对比后以去掉不相关的规则，以现*nat规则里有以下的对于docker的配置

*nat
:PREROUTING ACCEPT [27:11935]
:INPUT ACCEPT [0:0]
:OUTPUT ACCEPT [598:57368]
:POSTROUTING ACCEPT [591:57092]
:DOCKER - [0:0]
-A PREROUTING -m addrtype --dst-type LOCAL -j DOCKER
-A POSTROUTING -s 172.17.0.0/16 ! -o docker0 -j MASQUERADE
COMMIT

*filter规则里对docker的配置如下

*filter
:INPUT ACCEPT [139291:461018923]
:FORWARD ACCEPT [0:0]
:OUTPUT ACCEPT [127386:5251162]
:DOCKER - [0:0]
-A FORWARD -o docker0 -j DOCKER
-A FORWARD -o docker0 -m conntrack --ctstate RELATED,ESTABLISHED -j ACCEPT
-A FORWARD -i docker0 ! -o docker0 -j ACCEPT
-A FORWARD -i docker0 -o docker0 -j ACCEPT
COMMIT

去掉不相关规则后的配置文件如下(可以直接用)：

*nat
:PREROUTING ACCEPT [27:11935]
:INPUT ACCEPT [0:0]
:OUTPUT ACCEPT [598:57368]
:POSTROUTING ACCEPT [591:57092]
:DOCKER - [0:0]
-A PREROUTING -m addrtype --dst-type LOCAL -j DOCKER
-A OUTPUT ! -d 127.0.0.0/8 -m addrtype --dst-type LOCAL -j DOCKER
-A POSTROUTING -s 172.17.0.0/16 ! -o docker0 -j MASQUERADE
COMMIT  
# Completed on Sun Sep 20 17:35:31 2015
# Generated by iptables-save v1.4.21 on Sun Sep 20 17:35:31 2015
*filter
:INPUT ACCEPT [139291:461018923]
:FORWARD ACCEPT [0:0]
:OUTPUT ACCEPT [127386:5251162]
:DOCKER - [0:0]
-A FORWARD -o docker0 -j DOCKER
-A FORWARD -o docker0 -m conntrack --ctstate RELATED,ESTABLISHED -j ACCEPT
-A FORWARD -i docker0 ! -o docker0 -j ACCEPT
-A FORWARD -i docker0 -o docker0 -j ACCEPT
COMMIT  
# Completed on Sun Sep 20 17:35:31 2015

然后再加上自己服务器的过滤规则，合并后覆盖到Centos 7的/etc/sysconfig/iptables文件

重启iptables 服务

systemctl restart iptables.service

两次启动对应docker容器，

docker run -d -p 2181:2181 -p 2888:2888 -p 3888:3888 garland/zookeeper

发现容器启动成功，虽然有警告，但并不影响容器的使用

PS: @孙振树 提供的解决办法: 如果iptables是在docker后安装的，把docker重新安装下就可以了