一、响应者链

以UIResponder作为超类的任何类都是响应者。UIView和UIControl是UIReponder的子类,因此所有视图和所有控件都是响应者。

1、初始相应器
事件首先会传递给UIApplication对象,接下来会传递给应用程序的UIWindow,UIWindow会选择一个初始相应器来处理事件。初始响应器会选择下面的方式选择1、对于触摸事件,UIWindow会确定用户触摸的视图,然后将事件交给注册了这个视图的手势识别器或则注册视图层级更高的手势识别器。只要存在能处理事件的识别器,就不会再继续找了。如果没有的话,被触摸视图就是初始相应器,事件也会传递给它。

2、对于用户摇晃设备产生的或者是来自远程遥控设备事件,将会传递给第一响应器
如果初始响应器不处理时间,它会将事件传递给它的父视图(如果存在的话),或者传递给视图控制器(如果此视图是视图控制器的视图)。如果视图控制器不处理事件,它将沿着响应器链的层级继续传给父视图控制器(如果存在的话)。
如果在整个视图层级中都没与能处理事件的视图或控制器,事件就会被传递给应用程序的窗口。如果窗口不能处理事件,而应用委托是UIResponder的子类,UIApplication对象就会将其传递给应用程序委托。最后,如果应用委托不是UIResponder的子类,或者不处理这个事件,那么这个事件将会被丢弃。

4个手势通知方法

#pragma mark - Touch Event Methods
// 用户第一次触摸屏幕时被调用
- (void)touchesBegan:(NSSet<UITouch *> *)touches withEvent:(UIEvent *)event
{

}

// 当发生某些事件(如来电呼叫)导致手势中断时被调用
- (void)touchesCancelled:(NSSet<UITouch *> *)touches withEvent:(UIEvent *)event
{

}

// 当用户手指离开屏幕时被调用
- (void)touchesEnded:(NSSet<UITouch *> *)touches withEvent:(UIEvent *)event
{

}

// 当用户手指移动时触发
- (void)touchesMoved:(NSSet<UITouch *> *)touches withEvent:(UIEvent *)event
{

}

二、检测扫描事件

1、手动检测

//
// ViewController.m
// Swipes
//
// Created by Jierism on 16/8/4.
// Copyright © 2016年 Jierism. All rights reserved.
//

#import "ViewController.h"
// 设置检测范围
static CGFloat const kMinimmGestureLength = 25;
static CGFloat const kMaximmVariance = 5;

@interface ViewController ()
@property (weak, nonatomic) IBOutlet UILabel *label;
@property (nonatomic) CGPoint gestureStartPoint;
@end

@implementation ViewController


- (void)viewDidLoad {
  [super viewDidLoad];
  // Do any additional setup after loading the view, typically from a nib.
}

- (void)didReceiveMemoryWarning {
  [super didReceiveMemoryWarning];
  // Dispose of any resources that can be recreated.
}

- (void)touchesBegan:(NSSet<UITouch *> *)touches withEvent:(UIEvent *)event
{
  UITouch *touch = [touches anyObject];
  self.gestureStartPoint = [touch locationInView:self.view];
}

- (void)touchesMoved:(NSSet<UITouch *> *)touches withEvent:(UIEvent *)event
{
  UITouch *touch = [touches anyObject];
  CGPoint currentPosition = [touch locationInView:self.view];
  // 返回一个float的绝对值
  CGFloat deltaX = fabsf(self.gestureStartPoint.x - currentPosition.x);
  CGFloat deltaY = fabsf(self.gestureStartPoint.y - currentPosition.y);
  
  // 获得两个增量后,判断用户在两个方向上移动过的距离,检测用户是否在一个方向上移动得足够远但在另一个方向移动得不够来形成轻扫动作
  if (deltaX >= kMinimmGestureLength && deltaY <= kMaximmVariance) {
    self.label.text = @"Horizontal swipe detected";
    // 2s后擦除文本
    dispatch_after(dispatch_time(DISPATCH_TIME_NOW, (int64_t)(2 * NSEC_PER_SEC)),
            dispatch_get_main_queue(),
            ^{
      self.label.text = @"";
    });
  }else if (deltaY >= kMinimmGestureLength && deltaX <= kMaximmVariance){
    self.label.text = @"Vertical swipe detected";
    dispatch_after(dispatch_time(DISPATCH_TIME_NOW, (int64_t)(2 * NSEC_PER_SEC)), dispatch_get_main_queue(), ^{
      self.label.text = @"";
    });
  }
}

@end

2、识别器检测

//
// ViewController.m
// Swipes
//
// Created by Jierism on 16/8/4.
// Copyright © 2016年 Jierism. All rights reserved.
//

#import "ViewController.h"


@interface ViewController ()
@property (weak, nonatomic) IBOutlet UILabel *label;
@property (nonatomic) CGPoint gestureStartPoint;
@end

@implementation ViewController


- (void)viewDidLoad {
  [super viewDidLoad];
  // Do any additional setup after loading the view, typically from a nib.
  //创建两个手势识别器
  // 1、水平方向识别器
  UISwipeGestureRecognizer *horizontal = [[UISwipeGestureRecognizer alloc] initWithTarget:self action:@selector(reportHorizontalSwipe:)];

  horizontal.direction = UISwipeGestureRecognizerDirectionLeft | UISwipeGestureRecognizerDirectionRight;
  [self.view addGestureRecognizer:horizontal];
  
  // 2、垂直方向识别器
  UISwipeGestureRecognizer *vertical = [[UISwipeGestureRecognizer alloc] initWithTarget:self action:@selector(reportVerticalSwipe:)];
  vertical.direction = UISwipeGestureRecognizerDirectionUp | UISwipeGestureRecognizerDirectionDown;
  [self.view addGestureRecognizer:vertical];
}

- (void)didReceiveMemoryWarning {
  [super didReceiveMemoryWarning];
  // Dispose of any resources that can be recreated.
}

- (void)reportHorizontalSwipe:(UIGestureRecognizer *)recognizer
{

  self.label.text = @"Horizontal swipe detected";
  // 2s后擦除文本
  dispatch_after(dispatch_time(DISPATCH_TIME_NOW, (int64_t)(2 * NSEC_PER_SEC)),
          dispatch_get_main_queue(),
          ^{
            self.label.text = @"";
          });
}

- (void)reportVerticalSwipe:(UIGestureRecognizer *)recognizer
{
  self.label.text = @"Vertical swipe detected";
  // 2s后擦除文本
  dispatch_after(dispatch_time(DISPATCH_TIME_NOW, (int64_t)(2 * NSEC_PER_SEC)),
          dispatch_get_main_queue(),
          ^{
            self.label.text = @"";
          });
}

@end

三、实现多指轻扫

//
// ViewController.m
// Swipes
//
// Created by Jierism on 16/8/4.
// Copyright © 2016年 Jierism. All rights reserved.
//

#import "ViewController.h"



@interface ViewController ()
@property (weak, nonatomic) IBOutlet UILabel *label;
@property (nonatomic) CGPoint gestureStartPoint;
@end

@implementation ViewController


- (void)viewDidLoad {
  [super viewDidLoad];
  // Do any additional setup after loading the view, typically from a nib.
  
  for (NSUInteger touchCount = 1; touchCount <= 5; touchCount  ) {
    //创建两个手势识别器
    // 1、水平方向识别器
    UISwipeGestureRecognizer *horizontal = [[UISwipeGestureRecognizer alloc] initWithTarget:self action:@selector(reportHorizontalSwipe:)];
    
    horizontal.direction = UISwipeGestureRecognizerDirectionLeft | UISwipeGestureRecognizerDirectionRight;
    [self.view addGestureRecognizer:horizontal];
    
    // 2、垂直方向识别器
    UISwipeGestureRecognizer *vertical = [[UISwipeGestureRecognizer alloc] initWithTarget:self action:@selector(reportVerticalSwipe:)];
    vertical.direction = UISwipeGestureRecognizerDirectionUp | UISwipeGestureRecognizerDirectionDown;
    [self.view addGestureRecognizer:vertical];
  }
  
}

- (void)didReceiveMemoryWarning {
  [super didReceiveMemoryWarning];
  // Dispose of any resources that can be recreated.
}

- (NSString *)descriptionForTouchCount:(NSUInteger)touchCount
{
  switch (touchCount) {
    case 1:
      return @"Single";
    case 2:
      return @"Double";
    case 3:
      return @"Triple";
    case 4:
      return @"Quadruple";
    case 5:
      return @"Quintuple";
      
    default:
      return @"";
  }
}

- (void)reportHorizontalSwipe:(UIGestureRecognizer *)recognizer
{

  self.label.text = [NSString stringWithFormat:@"%@ Horizontal swipe detected",[self descriptionForTouchCount:[recognizer numberOfTouches]]];
  // 2s后擦除文本
  dispatch_after(dispatch_time(DISPATCH_TIME_NOW, (int64_t)(2 * NSEC_PER_SEC)),
          dispatch_get_main_queue(),
          ^{
            self.label.text = @"";
          });
}

- (void)reportVerticalSwipe:(UIGestureRecognizer *)recognizer
{
  self.label.text = [NSString stringWithFormat:@"%@ Vertical swipe detected",[self descriptionForTouchCount:[recognizer numberOfTouches]]];
  // 2s后擦除文本
  dispatch_after(dispatch_time(DISPATCH_TIME_NOW, (int64_t)(2 * NSEC_PER_SEC)),
          dispatch_get_main_queue(),
          ^{
            self.label.text = @"";
          });
}

@end

四、检测多次轻点

//
// ViewController.m
// TapTaps
//
// Created by Jierism on 16/8/4.
// Copyright © 2016年 Jierism. All rights reserved.
//

#import "ViewController.h"

@interface ViewController ()
@property (weak, nonatomic) IBOutlet UILabel *singleLabel;
@property (weak, nonatomic) IBOutlet UILabel *doubleLabel;
@property (weak, nonatomic) IBOutlet UILabel *tripleLabel;
@property (weak, nonatomic) IBOutlet UILabel *quadrupleLabel;

@end

@implementation ViewController

- (void)viewDidLoad {
  [super viewDidLoad];
  // Do any additional setup after loading the view, typically from a nib.
  // 创建4个点击手势识别器
  UITapGestureRecognizer *singleTap = [[UITapGestureRecognizer alloc] initWithTarget:self action:@selector(singleTap)];
  singleTap.numberOfTapsRequired = 1;
  singleTap.numberOfTouchesRequired = 1;
  // 附加到视图
  [self.view addGestureRecognizer:singleTap];
  
  UITapGestureRecognizer *doubleTap = [[UITapGestureRecognizer alloc] initWithTarget:self action:@selector(doubleTap)];
  doubleTap.numberOfTapsRequired = 2;
  doubleTap.numberOfTouchesRequired = 1;
  [self.view addGestureRecognizer:doubleTap];
  // 当doubleTap响应“失败”才运行singleTap
  [singleTap requireGestureRecognizerToFail:doubleTap];
  
  UITapGestureRecognizer *tripleTap = [[UITapGestureRecognizer alloc] initWithTarget:self action:@selector(tripleTap)];
  tripleTap.numberOfTapsRequired = 3;
  tripleTap.numberOfTouchesRequired = 1;
  [self.view addGestureRecognizer:tripleTap];
  [doubleTap requireGestureRecognizerToFail:tripleTap];
  
  UITapGestureRecognizer *quadrupleTap = [[UITapGestureRecognizer alloc] initWithTarget:self action:@selector(quadrupleTap)];
  quadrupleTap.numberOfTapsRequired = 4;
  quadrupleTap.numberOfTouchesRequired = 1;
  [self.view addGestureRecognizer:quadrupleTap];
  [tripleTap requireGestureRecognizerToFail:quadrupleTap];
}

- (void)singleTap
{
  self.singleLabel.text = @"Single Tap Detected";
  dispatch_after(dispatch_time(DISPATCH_TIME_NOW, (int64_t)(2 * NSEC_PER_SEC)), dispatch_get_main_queue(), ^{
    self.singleLabel.text = @"";
  });
}

- (void)doubleTap
{
  self.doubleLabel.text = @"Double Tap Detected";
  dispatch_after(dispatch_time(DISPATCH_TIME_NOW, (int64_t)(2 * NSEC_PER_SEC)), dispatch_get_main_queue(), ^{
    self.doubleLabel.text = @"";
  });
}

- (void)tripleTap
{
  self.tripleLabel.text = @"Triple Tap Detected";
  dispatch_after(dispatch_time(DISPATCH_TIME_NOW, (int64_t)(2 * NSEC_PER_SEC)), dispatch_get_main_queue(), ^{
    self.tripleLabel.text = @"";
  });
}

- (void)quadrupleTap
{
  self.quadrupleLabel.text = @"Quadruple Tap Detected";
  dispatch_after(dispatch_time(DISPATCH_TIME_NOW, (int64_t)(2 * NSEC_PER_SEC)), dispatch_get_main_queue(), ^{
    self.quadrupleLabel.text = @"";
  });
}


@end

五、检测捏合和旋转

#import <UIKit/UIKit.h>

@interface ViewController : UIViewController<UIGestureRecognizerDelegate>


@end

//
// ViewController.m
// PinchMe
//
// Created by Jierism on 16/8/4.
// Copyright © 2016年 Jierism. All rights reserved.
//

#import "ViewController.h"

@interface ViewController ()

@property (strong,nonatomic) UIImageView *imageView;

@end

@implementation ViewController

// 当前缩放比例,先前缩放比例
CGFloat scale,previousScale;
// 当前旋转角度,先前旋转角度
CGFloat rotation,previousRotation;

- (void)viewDidLoad {
  [super viewDidLoad];
  // Do any additional setup after loading the view, typically from a nib.
  previousScale = 1;
  
  UIImage *image = [UIImage imageNamed:@"yosemite-meadows"];
  self.imageView = [[UIImageView alloc] initWithImage:image];
  // 对图像启用交互功能
  self.imageView.userInteractionEnabled = YES;
  self.imageView.center = self.view.center;
  [self.view addSubview:self.imageView];
  
  // 建立捏合手势识别器
  UIPinchGestureRecognizer *pinchGesture = [[UIPinchGestureRecognizer alloc] initWithTarget:self action:@selector(doPinch:)];
  pinchGesture.delegate = self;
  [self.imageView addGestureRecognizer:pinchGesture];
  
  // 建立旋转手势识别器
  UIRotationGestureRecognizer *rotationGesture = [[UIRotationGestureRecognizer alloc] initWithTarget:self action:@selector(doRorate:)];
  rotationGesture.delegate = self;
  [self.imageView addGestureRecognizer:rotationGesture];
}


- (BOOL)gestureRecognizer:(UIGestureRecognizer *)gestureRecognizer shouldRecognizeSimultaneouslyWithGestureRecognizer:(UIGestureRecognizer *)otherGestureRecognizer
{
  // 允许捏合手势和旋转手势同时工作。否则,先开始的手势识别器会屏蔽另一个
  return YES;
}

// 根据手势识别器中获得的缩放比例和旋转角度对图像进行变换
- (void)transformImageView
{
  CGAffineTransform t = CGAffineTransformMakeScale(scale * previousScale, scale * previousScale);
  t = CGAffineTransformRotate(t, rotation   previousRotation);
  self.imageView.transform = t;
}

- (void)doPinch:(UIPinchGestureRecognizer *)gesture
{
  scale = gesture.scale;
  [self transformImageView];
  if (gesture.state == UIGestureRecognizerStateEnded) {
    previousScale = scale * previousScale;
    scale = 1;
  }
}


- (void)doRorate:(UIRotationGestureRecognizer *)gesture
{
  rotation = gesture.rotation;
  [self transformImageView];
  if (gesture.state == UIGestureRecognizerStateEnded) {
    previousRotation = rotation   previousRotation;
    rotation = 0;
  }
}


@end

六、自定义手势

//
// CheckMarkRecognizer.m
// CheckPlease
//
// Created by Jierism on 16/8/4.
// Copyright © 2016年 Jierism. All rights reserved.
//

#import "CheckMarkRecognizer.h"
#import "CGPointUtils.h"
#import <UIKit/UIGestureRecognizerSubclass.h> // 一个重要目的是使手势识别器的state属性可写,子类将使用这个机制断言我们所观察的手势已成功完成

// 设置检测范围
static CGFloat const kMinimunCheckMarkAngle = 80;
static CGFloat const kMaximumCheckMarkAngle = 100;
static CGFloat const kMinimumCheckMarkLength = 10;

@implementation CheckMarkRecognizer{
  // 前两个实例变量提供之前的线段
  CGPoint lastPreviousPoint;
  CGPoint lastCurrentPoint;
  // 画出的线段长度
  CGFloat lineLengthSoFar;
}


// 用lastPreviousPoint和lastCurrentPoint组成第一条线段,跟第二条线段形成角度去完成手势
- (void)touchesBegan:(NSSet<UITouch *> *)touches withEvent:(UIEvent *)event
{
  [super touchesBegan:touches withEvent:event];
  UITouch *touch = [touches anyObject];
  CGPoint point = [touch locationInView:self.view];
  lastPreviousPoint = point;
  lastCurrentPoint = point;
  lineLengthSoFar = 0.0;
}

- (void)touchesMoved:(NSSet<UITouch *> *)touches withEvent:(UIEvent *)event
{
  [super touchesMoved:touches withEvent:event];
  UITouch *touch = [touches anyObject];
  CGPoint previousPoint = [touch previousLocationInView:self.view];
  CGPoint currentPoint = [touch locationInView:self.view];
  CGFloat angle = angleBetweenLines(lastPreviousPoint, lastCurrentPoint, previousPoint, currentPoint);
  if (angle >= kMinimunCheckMarkAngle && angle <= kMaximumCheckMarkAngle && lineLengthSoFar > kMinimumCheckMarkLength) {
    self.state = UIGestureRecognizerStateRecognized;
  }
  lineLengthSoFar  = distanceBetweenPoints(previousPoint, currentPoint);
  lastPreviousPoint = previousPoint;
  lastCurrentPoint = currentPoint;
}

@end
//
// ViewController.m
// CheckPlease
//
// Created by Jierism on 16/8/4.
// Copyright © 2016年 Jierism. All rights reserved.
//

#import "ViewController.h"
#import "CheckMarkRecognizer.h"

@interface ViewController ()

@property (weak, nonatomic) IBOutlet UIImageView *imageView;


@end

@implementation ViewController

- (void)viewDidLoad {
  [super viewDidLoad];
  // Do any additional setup after loading the view, typically from a nib.
  CheckMarkRecognizer *check = [[CheckMarkRecognizer alloc] initWithTarget:self action:@selector(doCheck:)];
  [self.view addGestureRecognizer:check];
  self.imageView.hidden = YES;
}

- (void)didReceiveMemoryWarning {
  [super didReceiveMemoryWarning];
  // Dispose of any resources that can be recreated.
}

- (void)doCheck:(CheckMarkRecognizer *)check
{
  self.imageView.hidden = NO;
  dispatch_after(dispatch_time(DISPATCH_TIME_NOW, (int64_t)(2 * NSEC_PER_SEC)), dispatch_get_main_queue(), ^{
    self.imageView.hidden = YES;
  });
}


@end

以上就是本文的全部内容,希望对大家的学习有所帮助,也希望大家多多支持Devmax。

iOS轻点、触摸和手势代码开发的更多相关文章

  1. HTML5在微信内置浏览器下右上角菜单的调整字体导致页面显示错乱的问题

    HTML5在微信内置浏览器下,在右上角菜单的调整字体导致页面显示错乱的问题,本文给大家介绍的非常详细,对大家的学习或工作具有一定的参考借鉴价值,需要的朋友参考下吧

  2. iOS实现拖拽View跟随手指浮动效果

    这篇文章主要为大家详细介绍了iOS实现拖拽View跟随手指浮动,文中示例代码介绍的非常详细,具有一定的参考价值,感兴趣的小伙伴们可以参考一下

  3. ios – containerURLForSecurityApplicationGroupIdentifier:在iPhone和Watch模拟器上给出不同的结果

    我使用默认的XCode模板创建了一个WatchKit应用程序.我向iOSTarget,WatchkitAppTarget和WatchkitAppExtensionTarget添加了应用程序组权利.(这是应用程序组名称:group.com.lombax.fiveminutes)然后,我尝试使用iOSApp和WatchKitExtension访问共享文件夹URL:延期:iOS应用:但是,测试NSURL

  4. ios – Testflight无法安装应用程序

    我有几个测试人员注册了testflight并连接了他们的设备……他们有不同的ios型号……但是所有这些都有同样的问题.当他们从“safari”或“testflight”应用程序本身单击应用程序的安装按钮时……达到约90%并出现错误消息…

  5. Pan和2 Finger Pinch同步iOS – 同时 –

    2手势识别器:和:但同时捏和平底锅不起作用……

  6. ibm-mobilefirst – 在iOS 7.1上获取“无法安装应用程序,因为证书无效”错误

    当我的客户端将他们的设备更新到iOS7.1,然后尝试从AppCenter更新我们的应用程序时,我收到了上述错误.经过一番搜索,我找到了一个类似问题的帖子here.但是后来因为我在客户端使用AppCenter更新应用程序的环境中,我无法使用USB插件并为他们安装应用程序.在发布支持之前,是否有通过AppCenter进行下载的解决方法?

  7. ios – 视图的简单拖放?

    我正在学习iOS,但我找不到如何向UIView添加拖放行为.我试过了:它说“UIView没有可见的接口声明选择器addTarget”此外,我尝试添加平移手势识别器,但不确定这是否是我需要的它被称为,但不知道如何获得事件的坐标.在iOS中注册移动事件回调/拖放操作的标准简单方法是什么?

  8. ios – Swift 4添加手势:覆盖vs @objc

    我想在我的视图中添加一个手势,如下所示:但是,在Swift4中,我的编译器给出了以下错误:建议添加@objc以将此实例方法公开给Objective-C.实现此目的的另一个选项将覆盖touchesBegan()函数并使用它来处理点击.我试图以“Swift”的方式做到这一点,而不必带入Obj-C.有没有纯粹的Swift方式来添加这个轻击手势而不使用@objc?

  9. ios – 什么控制iTunes中iPhone应用程序支持的语言列表?

    什么控制iPhone应用程序的iTunes页面中支持的语言?

  10. ios – 获得APNs响应BadDeviceToken或Unregistered的可能原因是什么?

    我知道设备令牌在某些时候是有效的.用户如何使其设备令牌变坏?从关于“未注册”的文档:Thedevicetokenisinactiveforthespecifiedtopic.这是否意味着应用程序已被删除?.您应该看到四种分发方法:如果您选择AppStore或Enterprise,您将在后面的对话框中看到Xcode将APNS权利更改为生产:如果选择AdHoc或Development,则aps-environment下的文本将是开发,然后应与后端的配置匹配.

随机推荐

  1. iOS实现拖拽View跟随手指浮动效果

    这篇文章主要为大家详细介绍了iOS实现拖拽View跟随手指浮动,文中示例代码介绍的非常详细,具有一定的参考价值,感兴趣的小伙伴们可以参考一下

  2. iOS – genstrings:无法连接到输出目录en.lproj

    使用我桌面上的项目文件夹,我启动终端输入:cd然后将我的项目文件夹拖到终端,它给了我路径.然后我将这行代码粘贴到终端中找.-name*.m|xargsgenstrings-oen.lproj我在终端中收到此错误消息:genstrings:无法连接到输出目录en.lproj它多次打印这行,然后说我的项目是一个目录的路径?没有.strings文件.对我做错了什么的想法?

  3. iOS 7 UIButtonBarItem图像没有色调

    如何确保按钮图标采用全局色调?解决方法只是想将其转换为根注释,以便为“回答”复选标记提供更好的上下文,并提供更好的格式.我能想出这个!

  4. ios – 在自定义相机层的AVFoundation中自动对焦和自动曝光

    为AVFoundation定制图层相机创建精确的自动对焦和曝光的最佳方法是什么?

  5. ios – Xcode找不到Alamofire,错误:没有这样的模块’Alamofire’

    我正在尝试按照github(https://github.com/Alamofire/Alamofire#cocoapods)指令将Alamofire包含在我的Swift项目中.我创建了一个新项目,导航到项目目录并运行此命令sudogeminstallcocoapods.然后我面临以下错误:搜索后我设法通过运行此命令安装cocoapodssudogeminstall-n/usr/local/bin

  6. ios – 在没有iPhone6s或更新的情况下测试ARKit

    我在决定下载Xcode9之前.我想玩新的框架–ARKit.我知道要用ARKit运行app我需要一个带有A9芯片或更新版本的设备.不幸的是我有一个较旧的.我的问题是已经下载了新Xcode的人.在我的情况下有可能运行ARKit应用程序吗?那个或其他任何模拟器?任何想法或我将不得不购买新设备?解决方法任何iOS11设备都可以使用ARKit,但是具有高质量AR体验的全球跟踪功能需要使用A9或更高版本处理器的设备.使用iOS11测试版更新您的设备是必要的.

  7. 将iOS应用移植到Android

    我们制作了一个具有2000个目标c类的退出大型iOS应用程序.我想知道有一个最佳实践指南将其移植到Android?此外,由于我们的应用程序大量使用UINavigation和UIView控制器,我想知道在Android上有类似的模型和实现.谢谢到目前为止,guenter解决方法老实说,我认为你正在计划的只是制作难以维护的糟糕代码.我意识到这听起来像很多工作,但从长远来看它会更容易,我只是将应用程序的概念“移植”到android并从头开始编写.

  8. ios – 在Swift中覆盖Objective C类方法

    我是Swift的初学者,我正在尝试在Swift项目中使用JSONModel.我想从JSONModel覆盖方法keyMapper,但我没有找到如何覆盖模型类中的Objective-C类方法.该方法的签名是:我怎样才能做到这一点?解决方法您可以像覆盖实例方法一样执行此操作,但使用class关键字除外:

  9. ios – 在WKWebView中获取链接URL

    我想在WKWebView中获取tapped链接的url.链接采用自定义格式,可触发应用中的某些操作.例如HTTP://我的网站/帮助#深层链接对讲.我这样使用KVO:这在第一次点击链接时效果很好.但是,如果我连续两次点击相同的链接,它将不报告链接点击.是否有解决方法来解决这个问题,以便我可以检测每个点击并获取链接?任何关于这个的指针都会很棒!解决方法像这样更改addobserver在observeValue函数中,您可以获得两个值

  10. ios – 在Swift的UIView中找到UILabel

    我正在尝试在我的UIViewControllers的超级视图中找到我的UILabels.这是我的代码:这是在Objective-C中推荐的方式,但是在Swift中我只得到UIViews和CALayer.我肯定在提供给这个方法的视图中有UILabel.我错过了什么?我的UIViewController中的调用:解决方法使用函数式编程概念可以更轻松地实现这一目标.

返回
顶部